Savaria P.A.L. S Platform Lift

Superior Value

The P.A.L. (Personal Accessibility Lift) is constructed of stainless steel for the ultimate in corrosion protection.

The P.A.L. vertical platform lift provides a safe and reliable means of access for your home or commercial building. The P.A.L. presents an affordable solution with a pleasing appearance and is designed for use in either indoor or outdoor applications.

The standard Personal Access lift (P.A.L.) is an open model built to last with rugged materials and a powerful hydraulic system, designed for either residential or commercial use. The P.A.L.'s size and height can be customized to fit your exact application.

• Download PDF

Standard Equipment

• 409 Stainless Steel Construction in Tower and Mechanical Assembly
• 48" (1220mm), Lifting Height From Floor To Floor
• Rated Speed of 15' Per Minute (0.075m/sec.)
• 1:2 Cable Hydraulic Drive System
• 1 HP 24 Volt DC Motor
• 24 Volt DC Solid State Electronic Controller
• Power Requirement: 110 Volts, 1 Phase, 15 Amps
• Battery Backup Operation in Both Up and Down Directions
• Automatic Battery Recharging System
• Slack Cable Safety Device
• Lower and Upper Limit Switches with Final Limit
• Manual Lowering Device (Keyed)
• Negative Pressure Switch
• Aluminum Framed Cab Panels with Aluminum Inserts and Baked Polyester Powder Coat in Architectural White
• Anti-Skid Flooring on Platform and Ramp
• Automatic Emergency Platform Lighting
• Underpan Safety Sensor
• Automatic Flip-up 16" (406mm) Entrance Ramp
• Constant Pressure Directional Push Buttons on Car Station Control
• Key Operated On/Off Switch on COP
• Emergency Stop Switch and Audible Alarm Button on COP

Optional Equipment

• Custom Powder Coating Color
• 3 Stop Configuration
• Fasteners for Mounting Tower to Wall - Lag Bolts or Through Bolts
• Fasteners for Mounting Tower Base to Concrete
• Bottom Floor Permanent Ramp 8:1 or 12:1 ratio (Enclosed No Pit)
• Handsfree Telephone
• Under Platform Safety Prop or Shoring Blocks
• 43.375"H x 36"W (1073mm x 914mm) Platform Gate with Aluminum or Plexiglass Insert, includes Kwiklock
• 43.375"H x 36"W (1073mm x 914mm) Landing Gate with Aluminum, Plexiglass (Clear or Bronze) or Tempered Glass Insert, includes Kwiklock
• 43.375"H x 43.375"W (1073mm x 1073mm) Landing Gate with Aluminum, Plexiglass (Clear or Bronze) or Tempered Glass Insert, includes Kwiklock
• Custom Landing Gate 36"W (890mm) up to 84"H (2134mm), includes Kwiklock
• Custom Landing Gate 42.25"W (890mm) up to 84"H (2134mm), includes Kwiklock
• 36" W x 91.375"H (890mm x 2292mm) Door with Plexiglass orTempered Glass Insert, Includes Kwiklock
• Wing Walls
• Pro Manual Fire Rated Door with Prolock Interlock
• Pro Auto Fire Rated Door with Integral Doors and Operators and Prolock Interlock
• Commander Automatic Doors and Operators
• Automatic Gate Opener (P.A.L. Door/Gate Only)
• Hall Call Station Flush Mounted In Frame (not available with ProDoors), Keyed, Keyless, Call/Send, Call Only
• Hall Call Station Flush Mounted Remote. Keyed, Keyless, Call/Send, Call Only
• Hall Call Station Surface Mounted. Keyed, Keyless, Call/Send, Call Only
• Interlocks -- Kwiklock, Prolock, GAL

Safety Features

• Slack Rope Safeties that instantly lock the lift onto the rails the moment any lifting cable loses tension preventing any free fall
• Backup Lighting powered by emergency battery
• Interlocks provided, which maintain the door in the closed and locked position before elevator can move
• Improved lock performance utilizing nickel cadmium contact and beak coating
• Better alignment through the contact block
• Conformal coating on the lock board to help keep moisture away from the electronics

Specifications

• Rated Load: 750 lbs. (341 kg.)
• Normal Speed: 15 fpm (0.08 m/s)
• Clear Platform Dimensions:
• 36" W x 54" L (914 mm W x 1372 mm L)
• 36" W x 48" L (914 mm W x 1220 mm L)
• 36" W x 60" L (914 mm W x 15246 mm L)
• 42" W x 60" L (1067 mm W x 15246 mm L)
• Levels Served (Maximum 2)
• Number of Openings (Maximum 3)
• Operation: Constant pressure, anti-creep
• Power Supply: 110 Volts, 1 Phase, 15 Amps
• Drive Type: 1:2 Cable hydraulic
• Emergency Operation: Travel UP and DOWN Direction, 24 volt DC automatic recharging back-up battery system
• Corrosion Resistance: All materials other than drive train will be 409 stainless steel, aluminum or other corrosion resistant material
• Paint: Baked Electrostatic Polyester Gloss Powder
• Backed by the Savaria Concord Limited Warranty wich covers the repair or replacement of any defective parts for a period of 36 months from date of shipment

R & R Mobility Conversions provides installation, training and support for this product. Contact us today for more information.

---

You can Sign up and Log in to use the site's extended features.