Savaria ES 125 Platform Lift
Inclined Stair Platform Lift
Savaria Concord introduces the ES-125. This inclined platform lift has been proven to be a practical, reliable solution for improving accessibility in all facilities. More affordable than an elevator and takes up less space as well, the ES-125 inclined platform lift is designed to meet all your residential and commercial needs, whether indoors or outdoors.
•
Standard Equipment
- Aluminum extruded rail
- Continuous pressure buttons
- Mechanical access ramps
- One deflector sheave
- Cable driven unit
- Safety underpanel sensor
- 2 grab rails on car
- Keyed call/send controls on platform and at each landing
- Safety Brake
- Wall mounted call / send controls
- Obstruction sensors
- ABS plastic carriage covers
- Textured anti-slip surface on platform and ramps
- Car folds within 11" (279mm) of wall
Optional Equipment
- 3-position manual safety armrests
- Motorized 2 position safety armrests
- Fold-down seats with safety belt
- Powered fold platform
- Touch sensitive plate on the access ramps and under the platform to stop the lift if an obstruction is encountered
- 12 volt battery operation
- Hand-held pendant control on the platform
- Split rail
- Drive cabinet at top landing
- Audio visual alarm
- Motor with electro-mechanical brake
- Emergency stop switch
- Custom color
- Post for call/send station
- Outdoor package
- Zero clearance at top landing to avoid landing door (Not available on Plus model)
- Fire service function
- Pre drilled guide rail for masonry walls
- Joined guide rail for ease of access on narrow sites
- Self-support posts
- Manual lowering device
- Three (3) sided access to platform with motorized lateral access ramp
- Flush cabinet at front or back of rail (Plus system)
- Self-support posts
Safety Features
- Automatic dual access ramps
- Mechanical emergency brake in case of drive system failure
- Slack cable switch
- Keyed continuous pressure controls
- Upper / Lower limit switches
Specifications
- Platform Dimensions:
- Type I: 27.50" x 36" (700 x 914 mm)
- Type II: 28.50" x 44" (724 x 1,118mm)
- Type III: 30" x 48" (762 x 1,219 mm)
- Type IV: 30" x 44" (762 x 1,118 mm)
- All platforms have non-skid surfaces. The platform can be folded manually or with the help of an optional power-fold platform. Once folded the unit uses very little space in order to leave the staircase virtually unobstructed.
- Access Ramps - Two positive action automatic access ramps for straight or 90° entry
- Motor Assembly - 110 VAC, ½ hp (373 W), 1,750 rpm / gear reducer: 50:1
- Type of Drive Unit
- Standard system : Aircraft cable 3/16" (5 mm) with breaking load of 4,200 lbs (1,950 kg), deviator pulley and winding drum in a machine room.
- Plus system: Roller chain #50 and aircraft cable with breaking load of 6,100 lbs (2,767 kg). The electric motor gear reducer and controller are self enclosed at the top landing in a drive cabinet. No machine room required.
- Controller - Meets CSA and ETL standards - 24 VAC operating controls
- Power Supply - 110 VAC, 1Ph, 60Hz, 15 amp
- Rated Speed - 14.0 ft / min. (0.071 m / s)(approx.)
- Capacity - One person in a wheelchair
- Rated Load - 450 lbs (240 kg)
- Operating Controls - Continuous pressure directional buttons are installed on the platform with a key switch for increased safety.
- Call Stations - Continuous pressure directional buttons are installed at each landing
- Finish - One coat of primer and two coats of beige acrylic urethane paint on all steel surfaces
- Backed by the Savaria Concord Limited Warranty wich covers the repair or replacement of any defective parts for a period of 36 months from date of shipment
R & R Mobility Conversions provides installation, training and support for this product. Contact us today for more information.
You can Sign up and Log in to use the site's extended features.